The SFS FLEX-5P features 5,000 pounds of pulling force and is capable of installing rivet nuts from M3 to M10 and 6-32 to 3/8-24 and is based on an innovative modular design. The FLEX-5P comes as a pull to pressure tool but offers the flexibility of a pull to stroke installation with Sherex's conversion kit, allowing for the proper method to be used based on the application requirements. The FLEX-5P tool has the ability to be upgraded from the original base tool to different levels of process monitoring that will provide feedback to the operator ensuring each rivet nut is set properly. The original base tool also will offer upgrades such as conversion to an in-line tool and conversion to a split tool with a remote booster.
Sherex FLEX-5P Pull to Pressure Installation Tool
$2,290.00Price
- AIR PRESSURE Minimum - Maximum 5 – 7 bar 72-101 psi
- STROKE Maximum 7 mm .280 in
- MOTOR SPEED SPIN ON 1500 rpm
- SPIN OFF 2000 rpm
- PULL FORCE @ 6.2 bar 22.25 kN 5,000 lbf
- CYCLE TIME Approximately 2.5 sec
- NOISE LEVEL Less than 70 dB(A)
- WEIGHT Without kit 1.9 kg 4.2 lbs
- VIBRATION Less than 2.5 m/s2
- PLACING FEATURES Inserts M3 – M10 #4-40 – 3/8-24