 |
 |
 |
 |
 |
 |
 |
 |
| You Are Here: Home » THE ORIGINAL » Technical Information » ITR Engineering Data |
ITR Engineering Data
| UPSET LOAD (POUNDS) | |||||
"D" & "K" Series |
| "T" Series | |||
Thread Size | Minimum Grip Material | Maximum Grip Material | Minimum Grip Material | Maximum Grip Material | |
#6 | 890 | 1000 | 690 | 925 | |
#8 | 890 | 1000 | 690 | 925 | |
#10 | 1275 | 1460 | 990 | 1130 | |
1/4 | 1823 | 2130 | 1416 | 1615 | |
5/16 | 2860 | 4000 | 1800 | 2650 | |
3/8 | 2860 | 4000 | 1800 | 2650 | |
TORQUE-OUT (INCH-POUNDS) | |||||
"D" & "K" Series |
| "T" Series | |||
Thread Size | Minimum Grip Material | Maximum Grip Material | Minimum Grip Material | Maximum Grip Material | |
#6 | 63 | 83 | 65 | 72 | |
#8 | 63 | 83 | 65 | 72 | |
#10 | 100 | 115 | 105 | 115 | |
1/4 | 240 | 250 | 225 | 250 | |
5/16 | 408 | 600 | 325 | 600 | |
3/8 | 408 | 600 | 325 | 600 | |
PULL-OUT (POUNDS) | |||||
"D" & "K" Series |
| "T" Series | |||
Thread Size | Minimum Grip Material | Maximum Grip Material | Minimum Grip Material | Maximum Grip Material | |
#6 | 1000* | 1200 | 700* | 1025 | |
#8 | 1000* | 1200 | 700* | 1025 | |
#10 | 1165* | 1700 | 820* | 1200 | |
1/4 | 1230* | 2700 | 960* | 2200 | |
5/16 | 1900* | 6100 | 1150* | 2460 | |
3/8 | 1900* | 6100 | 1150* | 2460 | |
*Designates that material failed.
The above data is based on test averages of product installed under laboratory conditions and is intended to be used as a guide only. Product should be tested in your material and applications.
   |
 |
